Lupe Hodge. Furniture. November 11th , 2017.
The good news is, as far as naturally sourced materials are concerned, rattan is one of the safest from an environmental standpoint. While the palm tree the material is derived from is geographically limited in location, rattan itself is easily renewable, and the impact its sourcing has in the environment can be considered negligible.
Is Rattan Furniture Eco-Friendly?: As has hopefully become apparent in the previous few paragraphs, the answer to the question ‘is rattan furniture eco-friendly?’ can only be a definite ‘yes.’ Environmental soundness is only one more trait to add to the ever-expanding list of reasons which make rattan garden furniture such a favourite among western home-owners.
Uniqueness. Being mass produced store bought furniture will hardly have any difference from one piece to another as it will not be a one of a kind. Owning a customised furniture you will be the only person who has it and will reflect your particular taste on it.
Assured Quality. Quality assurance is a given in custom furniture as you will be aware about the materials and finish used and its perfection can be obtained, as you are in the process but with store bought furniture you buy a readymade furniture but are not into the whole process.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Netplay claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.